DESCRIPCIÓN
Crucifixión de Jesús en plata de ley 925 Colgante
La crucifixión es parte integral de la devoción cristiana. Simboliza el sufrimiento y las esperanzas. En la parte superior del crucifijo, hay un signo INRI, la abreviatura latina de "Jesús el Nazareno, Rey de los Judios". Cada línea en el cuerpo de Jesús está elaboradamente elaborada para reproducir la escena cuando fue clavado en la Cruz.
Material: plata de ley 925 con baño de oro rosa con piedra CZ
Altura: 34,4 mm
Ancho: 43,6 mm
Peso: 75g
Marca: APORRO
Inspirada en la religión, la colección de fe APORRO está diseñada con piedras CZ completamente heladas para adoptar un estilo más de moda que puedes usar a diario.
Exchanges & Returns
SHIPPING
ORDER&PAYMENT
- Collar
- Pulsera
- Anillo
-
Esta guía de tallas es sólo para su referencia, ya que el tamaño y el ajuste pueden variar de una persona a otra. Si desea más información sobre nuestro tallaje, póngase en contacto con nuestro servicio de atención al cliente. -
Ya hemos enumerado algunos pasos para que elijas la talla correcta de las pulseras. Tenga en cuenta que cuantos más abalorios añada a sus pulseras, más ajustadas quedarán.
Paso 1: Utiliza la cinta métrica o una tira de papel para medir tu muñeca.Sólo tienes que envolver la cinta métrica suave alrededor de la parte más ancha de tu muñeca y tomar nota de la longitud. Si utilizas una tira de papel normal, marca tu talla con un bolígrafo o un lápiz y luego utiliza una regla para medir la longitud (el extremo inicial del papel debe estar en la base de la regla y marcar el 0). Esa sería la talla de tu muñeca.
Paso 2: Añade una pulgada, o 2,5 centímetros, a esta medida para obtener la longitud final de tus pulseras.Asegúrate de que hay suficiente espacio para meter dos dedos, ya que es el espacio que necesitas para añadir los colgantes. Si quiere añadir menos de siete charms, añada 2 centímetros está bien. Si quieres poner ocho o más charms, añade 3 centímetros. Si compras un brazalete, sólo tienes que elegir la siguiente talla a partir de la medida real de tu muñeca.Notas:
Longitud de la pulsera Pulgadas 7 8 9 cm 17.78 20.32 22.86 -
US DIAMETER CIRCUMFERENCE 5 15.8 mm 49.6 mm 6 16.5 mm 51.8 mm 7 17.2 mm 54 mm 8 18.2 mm 57.2 mm 9 19.1 mm 60 mm 10 19.8 mm 62.2 mm 11 20.6 mm 64.8 mm 12 21.6 mm 67.9 mm 13 22.3 mm 70.1 mm 
STEP 1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
STEP 3: CUT OUT THE MEASURING RULERCut out the measuring ruler that you find under option two on the printed measuring guide.
STEP 4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
STEP 5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.EU DIAMETER CIRCUMFERENCE 50 15.8 mm 49.6 mm 52 16.5 mm 51.8 mm 54 17.2 mm 54 mm 56.5 18.2 mm 57.2 mm 60 19.1 mm 60 mm 62 19.8 mm 62.2 mm 64.5 20.6 mm 64.8 mm 68 21.6 mm 67.9 mm 70 22.3 mm 70.1 mm
1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
3: CUT OUT THE MEASURING RULERCut out the measuring ruler that you find under option two on the printed measuring guide.
4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
Reviews (17)
L**n B**ter
Mar 07, 2023
S**astian R**d
Dec 26, 2022
L**a B**isha
Nov 17, 2022
Y**ay D**gado
Nov 17, 2022
a**na g**genberger
Nov 14, 2022
V**erando I** R**es
.svg)
Nov 14, 2022
T**Invisibleme
Nov 09, 2022
b**trice A**ese
Oct 28, 2022
A**NTIS A**NTISIAN
Sep 09, 2022
A**hony
Aug 19, 2022
- 1
- 2
- 3