Verkaufspreis€109,99
Cashback Offer: Save up to €50 with Paypal
- Halskette
- Armbänder
- Ring
-
Diese Größentabelle dient nur zur Orientierung, da die Größe und Passform von Person zu Person variieren kann. Wenn Sie weitere Informationen zu unseren Größenangaben wünschen, wenden Sie sich bitte an unseren Kundenservice. -
Wir haben bereits einige Schritte für Sie aufgelistet, um Ihre richtige Größe Armbänder zu wählen. Bitte beachten Sie, dass die Armbänder umso enger werden, je mehr Anhänger Sie anbringen.
Schritt 1: Verwenden Sie ein Maßband oder einen Papierstreifen, um Ihr Handgelenk zu messen.Wickeln Sie das weiche Maßband einfach um die breiteste Stelle Ihres Handgelenks und notieren Sie die Länge. Wenn Sie einen einfachen Papierstreifen verwenden, markieren Sie Ihre Größe mit einem Kugelschreiber oder Bleistift und messen Sie dann die Länge mit einem Lineal (das Anfangsende des Papiers muss an der Basis des Lineals liegen und mit 0 markiert sein). Das ist Ihre Handgelenksgröße.
Schritt 2: Addieren Sie zu diesem Maß einen Zoll oder 2,5 Zentimeter, um die endgültige Länge Ihrer Armbänder zu erhalten.Vergewissern Sie sich, dass Sie genug Platz haben, um 2 Finger hineinzustecken, denn das ist der Platz, den Sie zum Hinzufügen der Charms benötigen. Wenn Sie weniger als sieben Anhänger hinzufügen möchten, sind 2 Zentimeter mehr in Ordnung. Wenn Sie acht oder mehr Anhänger tragen möchten, fügen Sie bitte 3 Zentimeter hinzu. Wenn Sie einen Armreif kaufen, wählen Sie einfach die nächste Größe anhand Ihres tatsächlichen Handgelenksumfangs.Anmerkungen:
Länge des Armbands Zoll 7 8 9 cm 17.78 20.32 22.86 -
US DIAMETER CIRCUMFERENCE 5 15.8 mm 49.6 mm 6 16.5 mm 51.8 mm 7 17.2 mm 54 mm 8 18.2 mm 57.2 mm 9 19.1 mm 60 mm 10 19.8 mm 62.2 mm 11 20.6 mm 64.8 mm 12 21.6 mm 67.9 mm 13 22.3 mm 70.1 mm 
STEP 1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
STEP 3: CUT OUT THE MEASURING RULERCut out the measuring ruler that you find under option two on the printed measuring guide.
STEP 4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
STEP 5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.EU DIAMETER CIRCUMFERENCE 50 15.8 mm 49.6 mm 52 16.5 mm 51.8 mm 54 17.2 mm 54 mm 56.5 18.2 mm 57.2 mm 60 19.1 mm 60 mm 62 19.8 mm 62.2 mm 64.5 20.6 mm 64.8 mm 68 21.6 mm 67.9 mm 70 22.3 mm 70.1 mm
1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
3: CUT OUT THE MEASURING RULERCut out the measuring ruler that you find under option two on the printed measuring guide.
4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
- BESCHREIBUNG
- BEWERTUNGEN (1)
- FAQs
